The Geonode alternative when you need more than cheap gigabytes

Geonode sells residential bandwidth for less than we do, and it is not close. This page will not pretend otherwise. It shows you what each catalogue contains, where the overlap ends, and which one fits the job you actually have.

  • 11 min read
  • Facts checked November 6, 2026
In this article
  1. At a glance
  2. The price gap, stated plainly
  3. Mobile: the product Geonode does not sell
  4. Static ISP: by the IP, or a whole subnet
  5. Mac servers: a line Geonode does not carry
  6. Sessions and targeting: where Geonode is level or ahead
  7. Trials, expiry, refunds and support
  8. The verdict
  9. What public reviews say
  10. Switching from Geonode
  11. FAQ
  12. Other comparisons
  13. How we checked
Geonode and ResiFactory compared: static addresses against a rotating pool

Geonode's pitch is wholesale. It runs its own residential network, publishes every rung of its price ladder, and keeps cutting the rate as volume grows. It charges $0.88 per gigabyte pay-as-you-go at 10 GB, falling to $0.30 at 100 TB, or $0.792 per gigabyte on a 10 GB monthly subscription, falling to $0.27 at 100 TB. If moving gigabytes cheaply is the whole job, you already know which way this comparison goes.

So we did what a buyer should do before switching in either direction. We read Geonode's residential, ISP, datacenter and pricing pages, its terms and its trial programme, and dated every fact we took. Each Geonode figure below links to the page we read it on, and each of our prices is read live from our own catalogue when this page is served.

The honest summary is short. Geonode is cheaper per gigabyte, matches our longest sticky sessions on its cheapest pool, and offers finer targeting than we do. What it does not sell is mobile, a whole ISP subnet that belongs to one customer, or a Mac server. If you need one of those three, the price comparison never starts.

ResiFactory vs Geonode at a glance

Every Geonode figure links to the page we read it on, with the date. Our column is read live from our catalogue.

ResiFactory and Geonode, feature by feature
FeatureResiFactoryGeonode
Residential price$1.50/GB on Essential, $3.00/GB on Premium $0.88 per gigabyte pay-as-you-go at 10 GB, falling to $0.30 at 100 TBChecked Nov 6, 2026
Residential subscriptionNo subscription: a prepaid wallet from $0.50 $0.792 per gigabyte on a 10 GB monthly subscription, falling to $0.27 at 100 TBChecked Nov 6, 2026
Mobile proxies$3.00/GB, real phones on carrier networks in 150 countries No mobile proxy product, and its published price list has no mobile lineChecked Nov 6, 2026
Static ISP price$255 a month for a /24 of 254 IPs $1.75 per IP a month at 3 to 4 IPs, falling to $1.25 at 1,000 or moreChecked Nov 6, 2026
Who shares a static IPNobody: each subnet goes to exactly one customer A shared IP can serve up to three customers, while a dedicated IP belongs to one accountChecked Nov 6, 2026
Smallest static ISP order50 single IPs 3 IPsChecked Nov 6, 2026
Static ISP coverageUS ranges today, international to follow In the US, with the ISP selectable by country onlyChecked Nov 6, 2026
Mac serversFrom $32 a day or $160 a month Residential, unlimited residential, ISP and rotating datacenter proxies, plus scraper, map, crawl and search APIsChecked Nov 6, 2026
Sticky sessionsRotating per request, or sticky for up to 24 hours (120 minutes on Essential) From 3 minutes up to 24 hours on residential, though the IP can change sooner if the device goes offlineChecked Nov 6, 2026
TargetingCountry, US state and ASN on every pool; city on Premium and Mobile Country, state, city, ZIP, ASN or ISP, and operating system, where matching IPs are onlineChecked Nov 6, 2026
ProtocolsHTTP on every pool; SOCKS5 on Premium, Mobile and ISP HTTP, HTTPS, SOCKS5 and UDP on residentialChecked Nov 6, 2026
Datacenter proxiesNot sold $0.53 per gigabyte pay-as-you-go at 10 GB, falling to $0.16 at 100 TBChecked Nov 6, 2026
Free trial1 GB of Premium free when a new account links Google $5 for 10 GB over 3 daysChecked Nov 6, 2026
RefundsRequests within 14 days of a top-up Refund requests within 7 days of a charge, and only for billing errors, charges after a cancellation, or where the law requires oneChecked Nov 6, 2026
PaymentVisa, Mastercard and Amex through Stripe, or SOL Cards, crypto, Alipay and wire transfer, but not PayPalChecked Nov 6, 2026

The price gap, stated plainly

Geonode's residential price is $0.88 per gigabyte pay-as-you-go at 10 GB, falling to $0.30 at 100 TB, or $0.792 per gigabyte on a 10 GB monthly subscription, falling to $0.27 at 100 TB. Both ladders are published in full, which more providers should do, and both reach rates far below anything we sell.

Our rates are $1.50/GB for Essential, $3.00/GB for Premium and $3.00/GB for Mobile. On every residential line, Geonode is the cheaper network at any volume you are likely to buy.

The reason is structural, and Geonode explains it openly. It runs its own network of 7.5M+ residential IPs active monthly in 150+ countries and sells that bandwidth as close to cost as it can. That is a different business from ours, which attaches mobile, static subnets and Mac servers to smaller pools.

If price per gigabyte is the only variable in your decision, buy from Geonode. If it is not, the rest of this page is the case for us. Our full sheet is on pricing.

Mobile: the product Geonode does not sell

Geonode has no mobile proxy product, and its published price list has no mobile line. Its catalogue covers residential, ISP and datacenter traffic, and stops there.

That gap matters when a target checks the network type. A home broadband IP and a phone on a carrier network look different to a site that asks, and no residential filter turns one into the other.

Our Mobile pool runs on real phones attached to carrier networks in 150 countries, with US state and city targeting, at $3.00/GB. See mobile proxies for how the pool is built.

If your work needs a carrier address, Geonode is not an option at any price, and the per-gigabyte comparison stops applying.

Static ISP: by the IP, or a whole subnet

Geonode prices static ISP addresses one at a time. Shared IPs cost $1.75 per IP a month at 3 to 4 IPs, falling to $1.25 at 1,000 or more, and dedicated ones cost $3.50 per IP a month at 3 to 4 IPs, falling to $2.25 at 1,000 or more. Every IP comes with unlimited, unmetered bandwidth, which is a genuinely good term.

The shared plan is cheaper for a reason: a shared IP can serve up to three customers, while a dedicated IP belongs to one account. The reputation of a shared address is set by everyone using it, not just by you.

Ours adds a different unit. We sell single IPs from $1.25 per IP a month (minimum 50 IPs), or a whole /24 for $255 a month, and each whole /24 goes to exactly one customer. With a /24 you are not renting addresses scattered across an inventory; you are getting a contiguous block that looks like a real network, and its reputation is yours to keep.

Where Geonode is the better buy is size. Its ISP orders start at 3 IPs, and it offers no free trial or sample IPs for ISP proxies. If you need five addresses, our smallest ISP purchase, 50 single IPs, is more than you want.

On coverage the two of us are level for now. Geonode's ISP inventory is in the US, with the ISP selectable by country only, and ours is US ranges today, international to follow. Our subnets are sold in restock windows, members first and then everyone; see ISP proxies for how a restock works.

Mac servers: a line Geonode does not carry

Geonode's catalogue is residential, unlimited residential, ISP and rotating datacenter proxies, plus scraper, map, crawl and search APIs. There is no server line in it, Mac or otherwise.

We rent Mac minis by the day and by the month, priced from $32 a day or $160 a month. The table below is read live from our catalogue, with sold-out builds marked rather than hidden.

This is the cleanest split on the page. If your job needs macOS on a dedicated machine with a residential or mobile exit in front of it, you can buy both halves here. At Geonode you can buy only the proxy.

Our Mac plans, read live from the catalogue
BuildMemory and lineDayMonthThree-month term
Mac mini M4 Pro Out of stock24 GB · 1 Gbps$52$260/mo$250/mo
Mac mini M416 GB · 1 Gbps$32$160/mo$150/mo
Mac mini M616 GB · 2.5 Gbps$42$210/mo$200/mo
Mac mini M5 Pro24 GB · 2.5 Gbps$72$290/mo$280/mo

Sessions and targeting: where Geonode is level or ahead

We expected to win this section. We do not, and it is worth saying so.

Geonode advertises sticky sessions from 3 minutes up to 24 hours on residential, though the IP can change sooner if the device goes offline. It targets by country, state, city, ZIP, ASN or ISP, and operating system, where matching IPs are online. That is a wider set of filters than ours, and it applies on its cheapest pool.

Our rule is up to 24 hours (120 minutes on Essential). Premium and Mobile carry the long hold, and Essential, our cheapest pool, carries the short one. Targeting is country, US state and ASN on every pool, with city on Premium and Mobile.

So if you need long sessions and fine filters at the lowest price, Geonode is the better buy. Our one caution is that a filter only helps when there are addresses behind it, and Geonode's own page carries a note that its pool is smaller than some competitors' and that buyers needing a niche geography should test it first. Test both networks on a small city or a single ASN before you assume either has depth there.

Protocols are close. Geonode lists HTTP, HTTPS, SOCKS5 and UDP on residential. We run HTTP on port 7777 on every pool, and SOCKS5 on port 1080 on Premium, Mobile and ISP.

Trials, expiry, refunds and support

Geonode is easy to try. Its residential trial is $5 for 10 GB over 3 days, and there is a larger programme: 1 TB free for 7 days, open to users of 500 GB or more a month after a manual review. Ours is 1 GB of Premium free when a new account links Google, which costs nothing.

On expiry, its terms describe pay-as-you-go bandwidth that remains available until it is used. Our wallet does not expire under normal circumstances either, as our Terms set out.

Refunds are where the two policies differ most. Geonode takes refund requests within 7 days of a charge, and only for billing errors, charges after a cancellation, or where the law requires one. Ours are requests within 14 days of a top-up, handled under the refund policy.

Geonode accepts cards, crypto, Alipay and wire transfer, but not PayPal. We take Visa, Mastercard and Amex through Stripe, or SOL.

Geonode offers live chat and email, with a stated response time under five minutes. Ours is Discord tickets and email, answered by the people who run the network.

The verdict, in one paragraph

On price, Geonode wins, and it wins on every residential line. It also matches our longest sticky sessions on its cheapest pool and offers finer targeting than we do. If your job is residential bandwidth at the lowest rate, with long sessions and detailed filters, buy from Geonode.

The case for us rests on what Geonode does not sell. Mobile proxies on real carrier networks, a whole ISP subnet that belongs to one customer, and Mac servers by the day or the month are all here, and none of them are there.

So this is a catalogue decision before it is a price decision. If your work needs one of those three, start here. If it does not, Geonode is the cheaper network, and we would rather say so than hide it.

ResiFactory is the right call if

  • You need mobile proxies. Geonode has no mobile proxy product, and its published price list has no mobile line. Ours run on real phones on carrier networks in 150 countries.
  • You need a static block that looks like a real network, owned by you alone. Geonode sells ISP addresses one at a time, and a shared IP can serve up to three customers, while a dedicated IP belongs to one account. We sell single IPs from $1.25 per IP a month (minimum 50 IPs), or a whole /24 for $255 a month, and each whole /24 goes to exactly one customer.
  • You need a Mac server. Geonode sells none. Ours are priced from $32 a day or $160 a month.
  • You need SOCKS5 on static addresses. Our ISP subnets answer on HTTP at port 7777 and SOCKS5 at port 1080, on every address in the block.
  • You want to buy a small amount first. Geonode's smallest residential purchase is 10 GB for $8.80; ours is any amount from $0.50, 0.1 to 1,000 GB at a time.
  • You want a session rule of up to 24 hours (120 minutes on Essential), with Premium and Mobile carrying the long hold and the rule printed the same way on every page we publish.
When Geonode is the right call instead

What public reviews say

Linked, not quoted. We copy no review score onto this page.

Geonode shows a review-site widget on its own pages. We quote no score from it or from anywhere else; a copied figure goes stale and misleads the person reading it.

Read the reviews where they are published, and judge us by our trust page, which lists what we can prove, and by the live prices on this page.

Switching from Geonode

  1. Sign in with Google, Apple, email, a passkey or Discord, then top up the pool you need from $0.50. There is no subscription to size.

  2. Geonode puts location and session settings in the username, and so do we. Our lines are host:port:user:pass; the API reference has the syntax.

  3. If you rely on ZIP or operating-system targeting, keep that work on Geonode. We do not offer either filter.

  4. If you are moving static addresses, start with a subnet at the next restock and keep your Geonode IPs running until the new block is verified.

  5. To compare both networks on your own targets first, use 1 GB of Premium free when a new account links Google.

FAQ

Is ResiFactory cheaper than Geonode?

No. Geonode charges $0.88 per gigabyte pay-as-you-go at 10 GB, falling to $0.30 at 100 TB, or $0.792 per gigabyte on a 10 GB monthly subscription, falling to $0.27 at 100 TB. Ours is $1.50/GB on Essential. On price per gigabyte, Geonode is the better buy.

Does Geonode sell mobile proxies?

No. Geonode has no mobile proxy product, and its published price list has no mobile line. Our Mobile pool runs on real phones on carrier networks in 150 countries.

Can I buy a few static IPs instead of a whole subnet?

Only down to our smallest ISP purchase, 50 single IPs. Geonode sells ISP addresses from 3 IPs, and it is the better fit for a handful.

How long do sticky sessions last?

Our rule is up to 24 hours (120 minutes on Essential), with Premium and Mobile carrying the long hold. Geonode advertises sticky sessions from 3 minutes up to 24 hours on residential, though the IP can change sooner if the device goes offline.

Does Geonode sell Mac servers?

No. Its catalogue is residential, unlimited residential, ISP and rotating datacenter proxies, plus scraper, map, crawl and search APIs. Ours are priced from $32 a day or $160 a month.

Do you offer a free trial?

Ours is 1 GB of Premium free when a new account links Google. Geonode offers a paid trial of $5 for 10 GB over 3 days.

Other comparisons

  • DataImpulse alternative

    Switch if you need static subnets, Mac servers or included city targeting. DataImpulse is cheaper per gigabyte and sells datacenter bandwidth we do not.

  • IPRoyal alternative

    Switch if you want a small residential test without a KYC check or a volume ladder. IPRoyal sells more product lines and holds longer sessions.

  • Webshare alternative

    Switch if you are buying rotating bandwidth by the gigabyte and need a wider country list than 50+ countries. Webshare wins on a free plan and cheap single static IPs.

Every comparison · The blog · Our pricing · API reference

How we checked

Every fact about another provider on this page comes from one of these public pages, read on the date shown. A fact older than 90 days fails our build, so it is read again or taken off the page.

Geonode is a trademark of its owner. ResiFactory is not affiliated with Geonode, and this page is ours, not theirs. If something here has changed, email [email protected] and we will correct it.

Try it on your own targets

Start small, then compare for yourself.

Top up any pool from $0.50, or try the free trial first.

See pricing